首页
/
每日頭條
/
科技
/
電腦主機裝機教程
電腦主機裝機教程
更新时间:2026-07-20 11:47:56

  1、拆開機箱,在機箱配件中找到螺柱,固定在機箱上。

  2、在主闆配件中找到擋闆,将其安裝在機箱上。注意:正反面不要裝反了否則不牢固,裝好之後應該是很難取下來的。左右也不要反了,跟主闆孔位比對一下,不然再拆有點麻煩。翹起來的彈片不要掰彎、弄斷,否則裝主闆很麻煩。

  3、拆出電源包裝,将其推入機箱,在用機箱中配的螺絲将其固定(4顆螺絲)。

  4、打開主闆蓋,取下保護塑膠片,将CPU輕輕放入,注意卡槽,不要錯了方向。裝好之後蓋回,壓好。

  5、接好前置USB 2.0 及 音頻接口線。到此即完成所有配件的組裝,嘗試接通電源,進行開機,如果OK,蓋好機箱蓋即可完成組裝。

Comments
Welcome to tft每日頭條 comments! Please keep conversations courteous and on-topic. To fosterproductive and respectful conversations, you may see comments from our Community Managers.
Sign up to post
Sort by
Show More Comments
Copyright 2023-2026 - www.tftnews.com All Rights Reserved